Rexton Steel & Alloys is a known dealer of SS 347/347H Sheets Plates Coils, which is weldable by common fusion and resistance methods. The addition of columbium produces a stabilized type of Stainless Steel 347 Plates that eliminates carbide precipitation, and consequently, intergranular corrosion. The additions of these elements in Stainless Steel 347/347H Coils promote improved inter-granular corrosion resistance. Applications that consistently used SS 347 Plates include: Heavy duty exhaust systems, High temperature chemical processes, General refinery piping, Heat exchanger tubes, High pressure steam pipes, High temperature steam service, Radiant superheaters, and so on. Other applications where SS 347/347H Coils are chosen are boilers, jet engine parts, exhaust manifolds, mufflers for large engines and other various welded parts. 347 Stainless Steel Sheets is columbium stabilized austenitic stainless steel plate with good general corrosion resistance and somewhat better resistance in strong oxidizing conditions than 321.
These 347/347H Stainless Steel Plates should be considered for applications requiring intermittent heating between 800 Degree F (427 Degree C) and 1650 Degree F (899 Degree C), or for welding under conditions which prevent a post-weld anneal. The use of slow speeds and constant positive feeds will minimize the tendency of 347/347H Stainless Steel Coils to work harden. Alloy 347/347H Sheets offers good resistance to polythionic acid stress corrosion cracking, encountered in oil refineries. These Alloy 347 Plates is non hardenable by heat treatment, and can only be hardened by cold working.
Standard | ASTM A240 / ASME SA240 |
---|---|
Thickness | 1.0mm – 100mm |
Width | 1000mm-2000mm |
Production | Hot-Rolled (HR) / Cold-Rolled (CR) |
Stainless Steel : Grade: 304, 304L, 304H, 309, 309S, 316, 316L, 316H, 310, 310S, 317, 317L, 321, 347, 904L |
C | Cr | Mn | Ni | P | S | Si | Cb/Ta | |
---|---|---|---|---|---|---|---|---|
347 | 0.08 max |
min: 17.0 max: 20.0 |
2.0 max |
min: 9.0 max: 13.0 |
0.04 max |
0.30 max |
0.75 max |
min:10x C max: 1.0 |
347H |
min: 0.04 max: 0.10 |
min: 17.0 max: 20.0 |
2.0 max | min: 9.0 max: 13.0 |
0.03 max | 0.30 max |
0.75 max |
min:10x C max: 1.0 |
Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% ksi offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
---|---|---|---|---|---|
347/347H |
75 (515) |
30 (205) |
40 | 201 | 95 |